Gizmo is designed to provide hours of fun play. If you are having trouble with Gizmo, before calling Tiger Electronics Customer Service, try checking these areas:
Gizmo will not respond to any sensors.
a. Gizmo may be asleep, if he is asleep the only way to wake him is pick him up and gently rock him side-to-side.
b. Gizmo is in DEEP SLEEP mode. To wake Gizmo from DEEP SLEEP mode pick him up and turn him completely upside down.
c. Gizmo may need new batteries. Follow the instructions in this manual to replace Gizmo's batteries.
d. Gizmo may be sick and must be fed and nursed back to health. Refer to the instructions for feeding Gizmo.
e. As a LAST RESORT, re-set Gizmo by referring to the instructions for RE-SETTING.
Gizmo will not play games.
a. You have to enter the play pattern correctly to start each game. Make sure you follow the pattern for the game.
b. Gizmo can only do one thing at a time. Therefore you have to be careful to wait for Gizmo to stop moving or speaking completely before entering the next item in the game pattern.
c. It is best to wait 3 to 5 seconds before doing each item in the game start pattern to make sure Gizmo knows you want to play the game.
d. Gizmo may not be paying attention. To get Gizmo to pay attention, pick Gizmo up and turn him completely upside down. Then try to play again.
e. Gizmo can only play one game at a time. You have to end one game before beginning another. To end a game, pick Gizmo up and turn Gizmo upside down until Gizmo says "no again."
Gizmo is behaving erratically, not speaking or seems to be malfunctioning or broken.
90-DAY LIMITED WARRANTY
Tiger Electronics Ltd. (Tiger) warrants to the original consumer purchaser of this product that the product will be free from defects in materials or workmanship for 90 days from the date of original purchase. This warranty does not cover damages resulting from accident, negligence, improper service or use or other causes not arising out of defects in materials or workmanship.
During this 90-day warranty period, the product will either be repaired or replaced (at Tiger's option) without charge to the purchaser, when returned with proof of the date of purchase to either the dealer or to Tiger.
Product returned to Tiger without proof of the date of purchase or after the 90-day warranty period has expired, but prior to one year from the original date of purchase, will be repaired or replaced (at Tiger's option) for a service fee of U.S.$ 20.00. Payments must be made by check or money order payable to Tiger Electronics Ltd.
The foregoing states the purchaser's sole and exclusive remedy for any breach of warranty with respect to the product.
All product returned must be shipped prepaid and insured for loss or damage to:
Tiger Electronics Ltd. Repair Dept.
1000 N. Butterfield Road, Unit 1023
Vernon Hills, Illinois 60061, U.S.A.
The product should be carefully packed in the original box or other packing materials sufficient to avoid damage during shipment. Include a complete written description of the defect, a check if product is beyond the 90-day warranty period, and your printed name, address and telephone number.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER REPRESENTATIONS OR CLAIM OF ANY NATURE SHALL BE BEINING ON OR OBLIGATE TIGER IN ANY WAY. ANY IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT INCLUDING WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE NINETY (90) DAY PERIOD DESCRIBED ABOVE. IN NO EVENT WILL TIGER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM POSSESSION, USE, OR MALFUNCTION OF THIS TIGER PRODUCT.
Some states do not allow limitation as to how long implied warranty lasts and/or exclusions or limitations of incidental or consequential damages, so the above limitations and/or exclusions of liability may not apply to you. This warranty gives you specific rights, and you may also have other right which vary from state to state.
This device complies with Part 15 of the FCC Riles. Operations is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limited for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct that interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio TV technician for help.
Furby, Furbish, and all related is ®, TM,& ©Tiger Electronics, LTD. USA
Back to Gizmo main
Back to Furby main